SWAT Handbook

1. SWAT Application - SWAT Application info can be found HERE
2. SWAT must use a SWAT | tag when conducting Conquest Raids.
3. Only SWAT has the ability to conduct Conquest Raids.
   1. A maximum amount of 10 SWAT can conduct Conquest Raids.
      1. SWAT must respond in waves.
         1. Exception: If 4 or less SWAT Officers are online during Conquest, wave rule is not required.
4. SWAT is required to use lethals during Conquest Raids.
   1. SWAT cannot restrain, impound or seize any vehicles during Conquest Raids.
5. SWAT must utilize SWAT gear during the Conquest Raids.
   1. SWAT cannot utilize Spike Strips, Bait Appliances, Tear Gas, or Flash Bangs during Conquest Raids.
6. SWAT must attack the first place gang's Capture Point.
   1. If the first place gang does not control any capture points SWAT may choose to attack Capture Points controlled by the 2nd place gang.
   2. SWAT may attack all civilians while attacking a capture point
   3. SWAT may only attack civilians that aren't on a targeted capture point when there is high risk to an officer's life. In such engagements, officers must make their best effort to leave once the level of risk has been reduced. Officers should not make such engagements a priority, nor attempt to intentionally put themselves in such situations.
      1. Example: Officers being fired upon when un-flipping their vehicle may return fire until they are able to leave.
      2. Example: Officers taking fire while enroute to a Capture Point may not stop to return fire or attack civs.
   4. Once the Capture Point is neutralized SWAT must leave the Capture Point.
      1. Exception: SWAT may remain if being attacked.
7. SWAT must re-group before being able to attack the next Capture Point.
8. SWAT members can only join the appropriate TeamSpeak channel 15 minutes prior to Conquest starting.
   1. TeamSpeak slots take priority over in game slots.